|
|
|
|
 |
Tru-Flate 21-133 Air Hose Fitting, 1/4 in, MNPT X Barb, 5/16 in ID, Solid Brass
|
|

All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
|
 |
|
|
|
|
 |
Tru-Flate 12-225 Air Line Plug, 1/4 in, MNPT, 300 psi
|
|

Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
|
|
 |
|
|
|
|
 |
Tru-Flate 21-595 Hose Adapter with Ball Socket, 1/4 in, MNPT X MNPS, Brass
|
|

All brass, corrosion resistant material. Connects FPT to FPT. With ball socket.
|
|
 |
|
|
|
|
 |
Tru-Flate 12-125 Hose Plug, 1/4 in, MNPT, 300 psi
|
|

Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
|
 |
|
|
|
|
 |
Tru-Flate 12-135 Air Line Nipple, 1/4 in, FNPT
|
|

Recognized by the extremely short pilot. Has the widest metal section between the ball groove and the pilot. The sealing surface on the end of the nipple is wider than other interchanges, resulting in better sealing and longer seal life. Intended for compressed air lines only. 300 PSI maximum rated working pressure.
|
|
 |
|
|
|
|
 |
Tru-Flate 12-235 Air Line Plug, 1/4 in, FNPT, 300 psi
|
|

Nipple design is considered the industrial standard. Identified by the 3/16" pilot and flat bottom V-shaped ball groove. Intended for compressed air lines only. 300 PSI maximum rated pressure.
|
|
 |
|
|
|
|
 |
Tru-Flate 12-325 Air Line Plug, 1/4 in, MNPT, 300 psi
|
|

Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.
|
|
 |
|
|
|
|
 |
Tru-Flate 12-335 Air Line Plug, 1/4 in, FNPT, 300 psi
|
|

Identified by a 5/16" pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure.
|
|
 |
|
|
|
|
 |
Tru-Flate 21-123 Air Hose Fitting, 1/4 in, MNPT X Barb, 1/4 in ID, Solid Brass
|
|

All brass, resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules.
|
|
 |
|
|
|
|
 |
Tru-Flate 21-535 Air Hose Bushing, 1/4 X 3/8 in, FNPT X MNPT, Brass
|
|

All brass, corrosion resistant material. Allows user to adjust thread sizes from 1/4" NPT through 3/8" NPT with either male or female ends.
|
|
 |