Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST
CHAIN - STRAIGHT LINK CHAIN - TWIST LINK
CHAIN - JACK CHAIN - TWIN LOOP
CHAIN - SASH CHAIN - DECORATIVE
CHAIN - PLASTIC CHAIN - SPECIALTY
GRAB HOOKS SLIP HOOKS
SHACKLES CHAIN - COLD SHUTS
CHAIN - LAP LINKS CHAIN - QUICK LINKS
CHAIN - SNAP LINKS CHAIN - SWIVELS
CHAIN - CLEVIS LINKS SPECIALTY FARM
HITCH PINS ANCHOR SHACKLES
CLEVISES & PINS SNAPS
WELDED RINGS CHAIN HOISTS
LOAD BINDERS POWER HOISTS
ROLLER CHAINS & PARTS
Sort By:
1 2 3 ... 51
Speeco 07090100/2702 Standard Tractor Lynch Pin
Speeco 07090100/2702 Standard Tractor Lynch Pin, 7/16 in, 2-1/8 in L, Steel, Zinc Plated
Our Price: $0.69

Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Speeco 07091900/3548 Standard Tractor Lynch Pin
Speeco 07091900/3548 Standard Tractor Lynch Pin, 3/16 in, 1-5/8 in L, Steel, Zinc Plated
Our Price: $0.69

Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Speeco 07090400/2704 Standard Tractor Lynch Pin
Speeco 07090400/2704 Standard Tractor Lynch Pin, 1/4 in, 2-1/8 in L, Steel, Zinc Plated
Our Price: $0.79

Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Fehr Bros 3/16 Anchor Shackle
Fehr Bros 3/16 Anchor Shackle, 3/16 in, 1/4 ton, Forged Steel, Hot Dip Galvanized
Our Price: $0.89

Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Campbell T7665012 Welded Ring
Campbell T7665012 Welded Ring, 1 in L X 0.18 in Wire Size
Our Price: $0.89

Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
QUICK LINK ZN 3/16
Baron 7350T-3/16 Reusable Quick Link, 3/16 in T x 1-7/8 in OAL, 1/4 in Jaw Opening, Steel, Zinc-Plated
Our Price: $0.99

Factory number indicated thickness (inches).
Campbell T5950124 Repair Lap Link
Campbell T5950124 Repair Lap Link, 3/16 X 1 in
Our Price: $0.99

For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
Fehr Bros 1/4IN Anchor Shackle
Fehr Bros 1/4IN Anchor Shackle, 1/4 in, 1/3 ton, Forged Steel, Hot Dip Galvanized
Our Price: $0.99

Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Speeco 07090800/2698 Tractor Lynch Pin
Speeco 07090800/2698 Tractor Lynch Pin, 7/16 in, Steel, Zinc Plated
Our Price: $0.99

Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Campbell T4900424 Cold Shut
Campbell T4900424 Cold Shut, 1/4 in
Our Price: $1.19

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
   
 
1 2 3 ... 51